for further information contact your local stmicroelectronics sales office. june 2016 docid029169 rev 2 1/3 ANT7-T-M24LR04E 14 mm x 14 mm antenna reference board for the m24lr04e-r dual interface eeprom data brief features ? ready to use printed circuit board including: ? m24lr04e-r dual interface eeprom ? 14 mm x 14 mm, 13.56 mhz dual layer etched antenna ? i2c test points ? rf wip/busy output (r f) to indicate an ongoing rf operation ? analog energy harvesting output (eh) description the ANT7-T-M24LR04E antenna reference board is a ready-to-use pcb that features an m24lr04e-r dual interf ace eeprom connected to a 14 mm x 14 mm, 13.56 mhz etched rf double layer antenna on one side, and to an i2c bus on the other side. the ANT7-T-M24LR04E demonstration board allows system designers to evaluate the m24lr04e-r performance and capabilities, and to get started with their design. to demonstrate the energy harvesting function, the ANT7-T-M24LR04E can be used in conjunction with the st demo-cr95hf-a board. the ANT7-T-M24LR04E design and the gerber files can be downloaded from www.st.com . figure 1. functional block diagram table 1. device summary reference order code ANT7-T-M24LR04E ANT7-T-M24LR04Ea 0 6 9 p p ; p p $ q w h q q d o r r s 9 & & * 1 ' ( + 5 ) 6 ' $ 6 & / 0 / 5 ( 5 www.st.com
revision history ANT7-T-M24LR04E 2/3 docid029169 rev 2 1 revision history table 2. document revision history date revision changes 26-apr-2016 1 initial release. 16-jun-2016 2 updated table 1: device summary .
docid029169 rev 2 3/3 ANT7-T-M24LR04E 3 important notice ? please read carefully stmicroelectronics nv and its subsidiaries (?st?) reserve the right to make changes, corrections, enhancements, modifications, and improvements to st products and/or to this document at any time without notice. purchasers should obtain the latest relevant in formation on st products before placing orders. st products are sold pursuant to st?s terms and conditions of sale in place at the time of o rder acknowledgement. purchasers are solely responsible for the choice, selection, and use of st products and st assumes no liability for application assistance or the design of purchasers? products. no license, express or implied, to any intellectual property right is granted by st herein. resale of st products with provisions different from the information set forth herein shall void any warranty granted by st for such product. st and the st logo are trademarks of st. all other product or service names are the property of their respective owners. information in this document supersedes and replaces information previously supplied in any prior versions of this document. ? 2016 stmicroelectronics ? all rights reserved
|
